How To String Husqvarna Weed Eater

This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Husqvarna weed eaters are some of the most popular weed eaters out there today. This is because they’re extremely effective at what they do.

However, to ensure they keep running in prime condition, they need to be maintained regularly. One of the ways you need to maintain your Husqvarna weed eater is by stringing it. 

However, you need to ensure you string your Husqvarna weed eater properly so it continues to run smoothly. So, we are here to help!

In this article, we will provide you with a step-by-step guide on how to string a Husqvarna weed eater. If you’re interested, read on for more! 

How To String A Husqvarna Weed Eater: A Step-By-Step Guide

While stringing a Husqvarna weed eater is fairly simple, you do need some basic knowledge of how to do it. Follow the steps below to string your Husqvarna weed eater in no time at all! 

How To String A Husqvarna Weed Eater: Step 1 

First, you need to make sure you have all of the necessary equipment. All you will need is some string, scissors, and a screwdriver.

The string will need to be the correct size for the Husqvarna weed eater model, so be sure you have checked this before you continue. 

How To String A Husqvarna Weed Eater: Step 2 

Now that all of your supplies are gathered, you can begin the process of stringing the Husqvarna weed eater. 

So, you need to take the spool away from the weed eater. It is best to use your screwdriver to unscrew the cap and take the spool out. 

How To String A Husqvarna Weed Eater: Step 3 

Next, you need to cut the string. Make sure the length that you cut is a little longer than the spool’s circumference.  

How To String A Husqvarna Weed Eater: Step 4 

Once you have completed the step above, it is best to wind the string around the spool. Make sure you do this in a clockwise direction.

There should be some slack at the end of the string, enough to feed it through the eyelets of the Husqvarna weed eater. 

Once you have wound the string, tie it in place. It is best to make a secure knot for this. 

How To String A Husqvarna Weed Eater: Step 5 

Now, all you need to do is check the tension. If there is too much tension in the string, then you risk breaking it. However, if there is too little tension then your Husqvarna weed eater will vibrate excessively and be difficult to manage. 

Ideally, the string should be tense enough that it does not slip. It should not be more or less tense than that. 

Congratulations! You have successfully strung your Husqvarna weed eater! 

How To String Husqvarna Weed Eater

How To Make Your Husqvarna Weed Eater Strings Last Longer 

Even though stringing your weed eater is a simple task, there are ways to ensure you do not need to do it regularly.

Here are our top tips to make your Husqvarna weed eater strings last longer.

1. Tips For Weed Feeding 

When you are feeding the spool, it is important to keep your string parallel to the floor. This stops it from hitting rocks or dirt and will ensure that it lasts for a longer period of time. 

You only need to feed string to your weed eater when it asks for it, and the best way to know this is to listen to the trimmer. If all sounds well, you can carry on!

However, if it starts to sound empty, you can go ahead and feed it more string. This saves you a lot of time and a lot of string! 

2. The Type Of String 

There are many factors that can have an impact on the longevity of your string. 

The first thing you need to consider is the size of the string. This is one of the most important factors that determine the longevity of a string. There are three different types of string sizes. They are:

  • Heavy-duty
  • Medium-heavy
  • Lightweight-medium 

It is best to choose the right string for your Husqvarna weed eater model. However, that is not the only factor to consider about string size.

We do not believe it is possible to cut grass with a string that is 0.095 or above. If you want to do this, then you will need to replace the blade inside your Husqvarna weed eater with a metal blade. 

The second thing that impacts the longevity of your Husqvarna weed eater string is the shape of the string. There are many string shapes you can choose from. They are: 

  • Diamond 
  • Multi-sided
  • Round 
  • Twisted strings 
  • And many more! 

We recommend using multi-sided strings for your weed eater because they perform the best and are durable.

However, this does depend on the model of the Husqvarna weed eater you are using. So, be sure to choose the strings that are right for you. 

3. String Maintenance 

You need to maintain the weed eater by restringing it on a regular basis to keep it functioning, and you also need to maintain the strings of the weed eater to ensure they function properly, too. 

To ensure the strings of your Husqvarna weed eater are in prime working conditions, then they should not be exposed to sunlight, particularly during the summer.

When the summer does come around, you need to soak your Husqvarna strings in water so they do not sustain any heat damage. 

As a general rule, the ticket the string is, the longer it will need to soak. 

If you do not want to soak your strings in water, then there is an alternative! You can place them in a bag along with a damp cloth, as this cloth will have a similar effect to the water. 

Final Thoughts 

Stringing your Husqvarna weed eater is made easy by following our step-by-step guide! However, you also need to ensure you are maintaining your strings to make sure they last longer!

Leave a Comment

Your email address will not be published. Required fields are marked *