Have you wondered how to store your weed eater but are unsure how? One of the main options weed eater owners consider is storing it in the garage or shed.
However, it can’t simply be left in the corner. Weed eaters must be hung in the garage to ensure they won’t collect any rubbish or debris as it lies there.
With our article, you’ll know how to hang your weed eater in your garage so it’s safe and secure. But first, let’s discuss a few things about storing a gas-powered or electric weed eater.
Is There A Different Way To Store Different Types Of Weed Eaters?
You may wonder if there are distinct differences between gas-powered and electric weed eaters.
However, no significant issues will prevent you from keeping them in the same position.
Ideally, your gas-powered weed eater should be hung on the wall so the gasoline doesn’t flood the engine or cause internal damage.
Likewise, the electric weed eater can be stored similarly, but you should remove the battery first. If you leave the battery inside your electric weed eater, the battery will deteriorate.
How To Hang Your Weed Eater
If you’re struggling to find where to hang your weed eater, we recommend making a new space on your wall.
There are two ways to hang your weed eater: shelf brackets, hooks, or a shelving rack. Now, let’s give you a few tips on how you would place these on your wall.
When you hang your weed eater, it should hang either horizontally or vertically. Remember not to leave it on the ground, or you may damage your weed eater’s engine, especially gas-powered ones.
Using Shelf Brackets
Shelf brackets are one of the best ways to store your weed eater. All you need to do are buy a good set of brackets online and ensure you have enough space.
You don’t want to install them too low, especially if you have kids, and you definitely don’t want them to get in the way.
If you’re worried about the type of shelf brackets, consider getting your average closet shelf brackets. You’ll find the place where your clothes rod rests will form a cradle for your weed eater to hang on your wall horizontally.
To install it, you need to find a spot on the wall to hang your weed eater and measure where it will hang.
You should make sure to write down the measurement number, so you know how high you want your weed eater to be.
To do this, you need to measure your weed eater, so you know how long it is from the handle to its base. Once you’ve done this, you just need to measure where you want to hang each bracket on the wall and mark a reference point.
Once you’ve arranged your measurements and marked them on the wall, you can hang your shelf brackets via the hardware it came with.
To make it easier, you can use a power screwdriver to secure your bracket where you’ve marked your spot.
Make sure you follow the instructions, and once they’re secured, you can place your weed eater on the clothes rod loops in a horizontal position.
You can hang your weed eater on storage hooks by following similar instructions to our shelf brackets above.
As with the shelf brackets, you should measure your wall first to ensure that the hooks aren’t low enough for a child to reach and ensure that your weed eater won’t be in the way.
If you’re looking for hooks, you can purchase them online or in your local home depot.
Remember to measure your weed eater too, and ensure that your hooks can carry its weight. Once you’ve marked where your storage hooks can go, you can install your storage hook via the instructions they came with.
Using A Shelving Rack
Our final method is to install a shelving rack, which you can also make at home. All you need are a piece of plywood and a power saw.
All you need to do is cut your plywood so that it is a rectangular shape that measures 34 inches in length and is at least 12 inches deep.
When doing this, ensure you wear the proper protective gear, such as safety goggles and gloves.
You’ll also need to ensure that you should follow all of the manufacturer’s instructions when using your power saw so that you don’t damage anything.
To make the right size slot, you must measure the width of your weed eater’s handle base. It will be hanging upside down, so you need to ensure it will fit.
Once you know it, mark it on the rack where you want it to be placed, and cut a slot into your plywood. You can do this with your power saw, and ensure it reaches the middle of your rack at around six inches deep.
If you have more tools, you can measure how they fit onto your shelving rack. Follow the previous instructions and adjust as you need to so that all your tools will fit on the board.
Once you’re happy with the number of slots available in your shelving rack, you can attach a set of shelf brackets.
Ideally, they should measure 8 inches by 11 inches, and attach them with your power screwdriver and the other hardware they came with.
Once your shelf brackets are installed, you can hang your rack on the wall. Make sure your tools are in the right place, and attach the rack via the brackets with the hardware they came with.
Hanging a weed eater in the garage isn’t tricky, and these are the most common ways to do so.
Hooks, shelf brackets, and a shelving rack are ideal options for anyone who wants to ensure their weed eater hangs on the wall safely. If you want to know more about weed eaters, check out our other helpful articles.